were unwrapped, and the individual sheets fed by hand to culling machines. There the square sheets were mechanically sliced, and the edges trimmed—the surplus material was gathered and returned to the steel mill for recycling—so that each piece matched the size determined by the design, invariably to tolerances less than a millimeter, even for this fairly crude component which the owner's eyes would probably never behold. The larger cut pieces moved on to another machine for heating and bending, then were welded into an oval cylinder. Immediately thereafter the oval-cut end pieces were matched up and welded into place as well, by a machine process that required only one workman to supervise. Pre-cut holes in one side were matched up with the pipe that would terminate at the filler cap—there was another in the bottom for the line leading to the engine. Before leaving the jobber, the tanks were spray-coated with a wax-and-epoxy-based formula that would protect the steel against rust. The formula was supposed to bond with the steel, creating a firm union of disparate materials that would forever protect the gas tank against corrosion and resultant fuel leakage. An elegant and fairly typical piece of superb Japanese engineering, only in this case it didn't work because of the bad electrical cable at the steel plant. The coating never really attached itself to the steel, though it had sufficient internal stiffness to hold its shape long enough for visual inspection to be performed, and immediately afterwards the gas tanks proceeded by roller-conveyor to the boxing shop at the end of the small-parts plant. There the tanks were tucked into cardboard boxes fabricated by yet another jobber and sent by truck to a warehouse where half of the tanks were placed aboard other trucks for delivery to the assembly plant, and the other half went into identically sized cargo containers which were loaded aboard a ship for transport to the United States. There the tanks would be attached to a nearly identical automobile at a plant owned by the same international conglomerate, though this plant was located in the hills of Kentucky, not the Kwanto Plain outside of Tokyo.
All this had taken place months before the item had come onto the agenda of the Domestic Content Negotiations. Thousands of automobiles had been assembled and shipped with defective fuel tanks, and all had slipped through the usually excellent quality-assurance procedures at the assembly plants separated by six thousand miles of land and sea. In the case of those assembled in Japan, the cars had been loaded aboard some of the ugliest ships ever made, slab-sided auto-carriers which had the riding characteristics of barges as they plodded through the autumnal storms of the North Pacific Ocean. The sea-salt in the air reached through the ships' ventilation systems to the autos. That wasn't too bad until one of the ships drove through a front, and cold air changed rapidly to warm, and the instant change in relative humidity interacted with that of the air within various fuel tanks, causing salt-heavy moisture to form on the exterior of the steel, inside the defective coating. There the salt immediately started working on the unprotected mild steel of the tank, rusting and weakening the thin metal that contained 92-octane gasoline.
Whatever his other faults, Corp met his death with dignity, Ryan saw. He had just finished watching a tape segment that CNN had judged unsuitable for its regular news broadcast. After a speech whose translation Ryan had on two sheets of paper in his lap, the noose was placed over his head and the trap was sprung. The CNN camera crew focused in on the body as it jerked to a stop, closing an entry on his country's ledger. Mohammed Abdul Corp.
Bully, killer, drug-runner. Dead.
"I just hope we haven't created a martyr," Brett Hanson said, breaking the silence in Ryan's office.
"Mr. Secretary," Ryan said, turning his head to see his guest reading through a translation of Corp's last words. "Martyrs all share a single characteristic."
"What's that, Ryan?"